4 specifications, 5 warranty/disclaimer – Inovonics EE4204 User Manual

Page 3

4 Specifications

Housing: 162 mm x 92 mm x 28 mm (6.38" x 3.60" x 1.10")
Operating environment: 0°- 60°C (32°- 140°F), 90% relative humidity,
non-condensing
Power requirement: 11 - 14 VDC; 150 mA
Current consumption: Approx. 135 mA
Output specifications: Open collector, drive down to .4V @ 100 mA; N/O
receiver case tamper contact closure, N/C receiver jam output indication.
Input specifications: A low is less than .5 V; a high is greater than 2.5 V.
Reset input: Contact closure, momentary low.
Receiver type: Frequency hopping spread spectrum
Number of points/transmitters: Four
Number of alarm outputs: Four open collector outputs
Number of fault outputs: One open collector output

4.1 Means of Conformity

Inovonics Wireless Corporation declares that the product listed above is in
conformity with the essential requirements and provisions of the following
Council Directives:

• R&TTE Directive
• Low Voltage Directive
• EMC Directive

and conforms to the following standards:

• EN 300 220 Receiver Class 1, Environmental Category 1
• EN 60950
• EN 301 489

5 Warranty/Disclaimer

Caution: Changes or modifications to this unit not expressly approved by
Inovonics Wireless Corporation may void the installer's authority to operate
the equipment as well as the product warranty.

Inovonics Wireless Corporation ("Inovonics") warrants its products
("Product" or "Products") to conform to its own specifications and to be free
of defects in materials and workmanship under normal use for a period of
thirty-six (36) months from the date of manufacture. Within the warranty
period, Inovonics will repair or replace, at its option, all or any part of the
warranted Product. Inovonics will not be responsible for dismantling and/or
reinstallation charges. To exercise the warranty, the User ("User", "Installer"
or "Consumer") must work directly through their authorized distributor who
will be given a Return Material Authorization ("RMA") number by Inovonics.
Details of shipment will be arranged directly through the authorized
distributor.
This warranty is void in cases of improper installation, misuse, failure to
follow installation and operating instructions, alteration, accident or
tampering, and repair by anyone other than Inovonics.
This warranty is exclusive and expressly in lieu of all other warranties,
obligations or liabilities, whether written, oral, express, or implied. There is
no warranty by Inovonics that Inovonics product will be merchantable or fit
for any particular purpose, nor is there any other warranty, expressed or
implied, except as such is expressly set forth herein. In no event shall
Inovonics be liable for an incidental, consequential, indirect, special, or
exemplary damages, including but not limited to loss of profit, revenue, or
contract, loss of use, cost of down time, or interruption of business, nor any
claim made by distributor's customers or any other person or entity.
This warranty will not be modified or extended. Inovonics does not
authorize any person to act on its behalf to modify or extend this warranty.
This warranty will apply only to Inovonics Products. Inovonics will not be
liable for any direct, incidental, or consequential damage or loss
whatsoever, caused by the malfunction of Product due to products,
accessories, or attachments of other manufacturers, including batteries,
used in conjunction with Inovonics Products.

Note: E-mail [email protected] for a copy of the CE Declaration of
Conformity.