Hardy HI 2204LT Weight Transmitter - Manual (Page 9)

HI 2201LT/HI 2204LT
5
The transmitter output loop can be wired with any two
conductor shielded cable. The two inner conductors
are connected to the output of the transmitter at the
two terminals marked LOOP. (See Fig. 3 & 4)
Note which wire is connected to each terminal to
maintain correct polarity within the loop.
FIG. 3 OUTPUT LOOP TERMINALS
Loop Powered Level
Weight Transmitter
+ -
Power
Supply
Receiver
#3
- +
Receiver
#1
Receiver
#2
4mA-20mA