Hardy HI 6300 Series - Manual (Page 67)

Instrument Configuration 59
•
•
•
•
•
•
On the Web page, select the communication menu and then select the Modbus RTU
submenu, and left click inside the Parity field and select even, odd or off using the
drop down menu.
On the HI 6300 series instrument display, select the communication menu and use
the UP or DOWN button to select the Modbus-RTU submenu, then select the Slave
Address menu item. The current Parity value will be displayed, press the ENTER or
the RIGHT button if the Parity needs to be modified.
Termination Parameter
This parameter is used to enable termination of the Modbus-RTU interface, either through
sofware or manually by inserting a wire link between the TERM and GND connections on
the RS-485 terminal connector.
HI 6300 HI 6310