Hardy HI 6300 Series - Manual (Page 5)

Initial Set-Up:
Set Up may be preformed through the front panel display or through
the integrated Webserver. If setting up using the Webserver, follow the
Communications>Ethernet TCP/IP instructions first and connect an
Ethernet cable between the instrument and a PC.
Suggested flow when setting up the instrument for the first time:
If setting up an instrument without a display for the first time, skip to
the communication section below.
SET UP (minimum)
1) Unit Capacity
2) Grads
3) Decimal Point
4) Motion Tolerance
Filter
1) Num Averages
2) Waversaver
Calibration
1) Cal Date
2) Cal Method
a. C2 eCal
b. Hard Cal
3) Complete Cal
Procedure