8 | maintenance – GEA Bock HGZ7 User Manual
Page 32
32
D
GB
F
E
09726-11.2014-DGbF
Ventilplatte LP-Stufe
Ventilplatte HP-Stufe
8| Maintenance
Safety valve
Safety bolt
Installation of the valve plates:
Valve plate LP stage
Valve plate HP stage
Safety valve
Safety bolt
8.4 Replacing the valve plates
The compressors are divided into an LP and an HP compressor stage. Different valve plate designs
are required because of the different ducts in the individual compressor stages.
Fig. 32
WARNING
The valve plates have been fitted with safety bolts to prevent any confusion.
The safety bolts engage in the corresponding bores on the cylinder
heads,
the safety bolts must not be removed!
See also other documents in the category GEA Bock Air equipment:
- HG5 (32 pages)
- HG7 (34 pages)
- HG4 (32 pages)
- HG6 (32 pages)
- HG8 (38 pages)
- HG34e (30 pages)
- HG22Р (26 pages)
- HG12Р (26 pages)
- BCM2000 (18 pages)
- HG22e (26 pages)
- HG34P (26 pages)
- HG88e (38 pages)
- HG44e (34 pages)
- HА4 (32 pages)
- HА34P (26 pages)
- HA12P (26 pages)
- HA5 (32 pages)
- HA6 (32 pages)
- HG22Р CO2 (28 pages)
- HG34P CO2 (28 pages)
- HG4 CO2 (30 pages)
- HG12Р CO2 (28 pages)
- HG12e CO2 (28 pages)
- HGX2 CO2 T (28 pages)
- HGX34 CO2 T (40 pages)
- HGX46 CO2 T (40 pages)
- HAX2 CO2 T (28 pages)
- HG5 R134a (32 pages)
- HG6 R134a (32 pages)
- HG7 R134a (32 pages)
- HG4 R134a (32 pages)
- F (44 pages)
- F18 (28 pages)
- FK40 (26 pages)
- FK30 (26 pages)
- FK50 (26 pages)
- FK20 (26 pages)
- HG22P A (28 pages)
- HG34e A (28 pages)
- HG22e A (28 pages)
- HGX34P 2 pole (32 pages)