Doepfer A-181 3.5/6.35 Multiple - Manual

doepfer System A - 100 MULTIPLES 2 A-181
1
1. Introduction
Module A-181 (MULTIPLES 2) is a double set of
multiple sockets. Unlike module A-180, it takes
quarter-inch as well as 3.5 mm plugs.
The upper section has three inter-linked sockets,
including one 6.3 mm mono jack socket. This makes
it easy to connect the A-100 to the big scary world of
quarter-inch jack connectors, without having to use a
special cable.
Typical applications might be to send the audio out
from the A-100 directly to a mixer or amplifier, or to
patch audio signals or control voltages in to the A-100
from a source (sampler output, MIDI-CV interface,
etc.) which has 6.3mm connectors.
The lower section comprises one 6.3 mm stereo
jack socket and two standard A-100 3.5 mm sockets
(see fig. 1). A typical use might be to send a stereo
audio output to a mixer channel which uses a stereo
6.3 mm connector.
A-181
MULTIPLES 2