Doepfer A-163 Voltage Controlled Divider - Manual

doepfer System A - 100 VC Frequency Divider A-163
1
1. Introduction
Module A-163 is a voltage controlled audio fre-
quency divider.
The frequency of the input signal (preferably the rec-
tangle output of a VCO) is divided by an integer factor
N (N = 1, 2, 3, 4 ... up to about 20). The output
waveform is rectangle with 50% duty cycle.
The divisor N can be adjusted manually and modula-
ted with an external control voltage (e.g. from LFO,
ADSR, Random, MIDI-to-CV, Theremin, Light-to-CV,
analog sequencer) with attenuator.
The following table shows the differences between the
divider modules available in the A-100 system.
A-115 A-113 A-163
Divisor
setting fixed manually voltage contr.
+ manually
Divisor
range 2, 4, 8, 16 1... 24
integer
1... 20
integer
No. of
outputs 4
(mixed)
4
(mixed+single)
1
Output
waveform
rectangle sawtooth rectangle
Manual CV In
A-163
VDIV
In
Out
CV