Cisco 3032 - Manual (Page 7)

7
Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide
OL-14317-01
Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide
Installation Warning Statements
For more information about the components of the information panel, see the Dell
documentation at
www.support.dell.com .
Installation Warning Statements
This section includes the basic installation warning statements. Translations of
these warning statements appear in the Regulatory Compliance and Safety
Information for the Cisco Catalyst Blade Switch 3000 Series for Dell document
that shipped with the switch.
Warning To prevent the switch from overheating, do not operate it in an area that
exceeds the maximum recommended ambient temperature of 113°F (45°C). To
prevent airflow restriction, allow at least 3 inches (7.6 cm) of clearance around
the ventilation openings. Statement 17B
Warning Class 1 laser product. Statement 1008
Warning Only trained and qualified personnel should be allowed to install, replace, or
service this equipment. Statement 1030
1 Dell server chassis 7 I/O module C2
2 Primary CMC
1
module
1. CMC: Chassis Management Controller.
8 I/O module B2
3 Switch installed in I/O module A1 9 I/O module A2
4 I/O module B1 10 Secondary CMC module
2
2. This module is optional.
5 I/O module C1 11 Fan modules
6 Optional iKVM
3
module
3. iKVM: integrated keyboard video mouse.
12 Power supplies