Cisco 3032 - Manual (Page 25)

25
Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide
OL-14317-01
Cisco Catalyst Blade Switch 3130 for Dell and Cisco Catalyst Blade Switch 3032 for Dell Getting Started Guide
Planning and Creating a Switch Stack (Only 3130G-S and 3130X-S Switches)
Connecting the StackWise Plus Cables
Follow these steps to connect the StackWise Plus cables:
Step 1 Remove the dust covers from the StackWise Plus cables, and store them for
future use.
Step 2 Verify that cables are aligned as shown in Figure 8 .
Figure 8 Inserting the StackWise Plus Cable
Step 3 Insert one end of the cable into the StackWise Plus port on the front panel of the
switch. Insert the other end of the cable into the connector on the other switch (see
Figure 8 ).
Always use a Cisco-approved StackWise Plus cable to connect the switches.
When you remove the StackWise Plus cables from the connectors, replace the dust
covers to protect them from dust.
Caution Removing and installing the StackWise Plus cable can shorten its useful life. Do
not remove and insert the cable more often than is absolutely necessary.
250315
STK B
A
17X
18X
19X
20X
21
22