Canon FS 2710 - Manual (Page 34)

34
34
After a film has been scanned, it can be ejected from the scanner automatically with
the Auto Eject function. The film is ejected to a position approximately 1 centimeter
ahead of its normal position, making it easier to remove from the scanner. The default
factory setting is Auto Eject = On. If you wish to scan the same piece of film repeatedly,
it is advisable to set the Auto Eject setting to Off to speed up the process.
To Set the Auto Eject Function
Select the [Film] menu from the control panel and choose [Auto Eject].
Clicking on Auto Eject places or removes the check mark to its left. A check mark
indicates that Auto Eject is active while no check mark indicates that is off.
Hint
• When the Auto Eject function is off and you wish to eject the film, click the
[Eject] button.
• The Auto Eject function takes effect only after the scan is complete. The film
does not automatically return to the eject position after the preview, browser
or zoom functions.
Setting the Auto Eject Function
S T E P 2