Canon FS 2710 - Manual (Page 32)

32
32
S T E P 2
Selecting the Scan Settings
Plug-in module FS generally adjusts the auto exposure and auto focus settings at the
preview stage. You can also have it adjust these settings at the other stages. This results
in a better image, but scanning and browsing may require more time. To have it adjust
the settings at all stages, enable the [Set Exposure Value and Focus Value when Scan-
ning] option with the procedures below.
Click on the [Preferences] menu and select [Scan Settings].
The Scan Settings dialog box will appear.
Click on the check box to insert an X beside the [Set Exposure Value and
Focus Value when Scanning] option.
Click on the [OK] button.
Scan Settings Dialog Box
Click on the check box to insert an X.