COP-USA DVRC264-4CH_USB - Manual (Page 74)

Digital Video Recorder User Manual
68
STEP2 Click Load default. Select setup blocks; please refer to Fig 5.2 Reset Blocks.
STEP3 Press OK to do default. It will return to TOOLS interface after finished.
5.4 Check System Information
Users can check system information like firmware version, IP address etc.
STEP1 Press right mouse to show the control bar. Click Menu, referring to Fig 4.2 Up-listed Menu.
STEP2 Click Info, the window below will appear.
Fig 5.3 Status Interface
STEP3 Click System, the window below will display. Check firmware version, recording parameters here.