COP-USA DVRC264-4CH_USB - Manual (Page 139)

Digital Video Recorder User Manual
10
CHAPTER 3 Basic Operation Guide
3.1 How to Start DVR
Notice: Before you power on the machine, please make sure the power input of DVR is eligible for local power supply.
If the power indicator light is off, please do as the following to start DVR:
STEP1 Connect DVR to AC adaptor and plug in.
STEP2 Turn on the DVR.
STEP3 Wait for DVR to initialize.
After the DVR is powered on, ‘STARTING……’ appears on the screen, which indicates DVR is initializing.
When ‘WELCOME’ is displayed, you have been in live display mode. You could press "Menu" button to enter the Main
Menu.
The symbols which are displayed on the screen are explained as following table.
Symbol Meaning Symbol Meaning
LIVE Live state REC Manual record
A Sensor record M Motion record
DISK Ratio of using HDD V-LOSS Video loss
3.2 Main Menu Setting
Steps of entering the Main Menu are described as below:
STEP1 Press "Menu" button and input username and password (referred Fig3.1 Login), you will see the Main Menu