COP-USA DVRC264-4CH_USB - Manual (Page 142)

Digital Video Recorder User Manual
13
You could set DVR name. Range for inputting the words contents letters from ‘a’ to ‘z’ and numbers from ‘0’ to ‘9’.
STEP1 Press "A" button to switch the inputting mode
STEP2 Modify the DVR name.
STEP3 Press "Enter" key to confirm the operation.
4. DVR ID
You could set DVR ID. It consists of three numbers.
STEP1 Press "Up", fDown", "Left" and "Right" buttons to move the cursor.
STEP2 Press "Enter" key to modify numbers.
STEP3 Input three numbers, and press "Enter" key to confirm modifying the parameter.
STEP4 Press "OK" button to confirm the operation.
5. DATE FORMAT
There are three options to choose:
x
Asian Date format: YY/MM/DD.
x
European Date format: DD/MM/YY.
x
American Date format: MM/DD/YY.
6. TIME ADJUST
Time Adjust menu is shown as Fig3.5 Tim e Adjust. You must stop recording first to adjust time.
STEP1 Press "Up", "Down", "Left" and "Right" buttons to move the cursor.
STEP2 Use the numbers to modify time.
You also can use "+" and "-" button to modify time.
STEP3 Press "Enter" key to confirm the operation.
Notice: If time that you adjust is less than current time, the record between adjusted time and current time will be delete automatically.
7. BUZZER ALARM
You could set continual time for buzzer alarm. There are seven options to choose: always, 5 seconds, 10 seconds, 30
seconds, 1 minute, 2 minutes and 4 minutes.
3.2.2 Live Configuration
Live Configuration menu is shown as Fig3.6 Live Configuration.