COP-USA NVR2816NE-L - Manual (Page 30)

NVR User Manual
24
Fig 5-11 Record Configuration-Record Bit rate
5.3.3 Time
Step1: Enter into MenuSetupRecordTime interface.
Refer to Fig 5-12:
Pre-alarm record time: The record time prior to actual
triggering of an alarm i.e. record time before motion detection
or a sensor alarm was triggered.
Post-alarm record: Set the post recording time after the
alarm is finished, five options: 10s, 15s, 20s, 30s, 60s, 120s,
180s and 300s.
Expire time: The time till which the records would be
retained. If the set date is overdue, the recorded files will be
deleted automatically.
Fig 5-12 Record Configuration-Time
Step2: Select “All” to setup all channels with the same parameters.
Step3: Click “Apply” to save the setting; click “Exit” to exit the current interface.
Parameter Meaning
Rate Range from: 1-30 （NTSC）1-25(PAL)
Resolution Supports 1080P, 720P, VGA
Quality Unavailable
Encode CBR
Max bit
stream
Ranges from 256 ~12288 kbps