COP-USA CD55HD - Manual (Page 8)

Operation Manual for Intelligent Speed Dome Camera
7
2.4.8.6 AMOUNT: the value of exposure-compensation:-7 - +7.
2.4.8.7 RETURN: to return to the WB/AE SETUP menu.
2.4.9 RETURN: to return to the MAIN MANU.
2.5 MOTION SETUP
2.5.1 PRESETS: to enter the Preset Position submenu.
2.5.1.1 PRESET NO: to edit the preset number.
2.5.1.2 EDIT LABEL: to edit the preset label. After entering the edit
mode, 1-128 present positions. It displayed on screen as the
pictures: in the picture, “PRESET NO” stands for NO.1 present
position, the topic is “NO LABEL”. Using PANLEFT/RIGHT
can remove the cursor, TILT UP/DOWN can modify the number,
press the “CLOSE”, exit edit mode and save it. The topics of
the present positions includes 10 characters at most, they are
0-9, A-Z, blank and special characters including =
@+-./ etc. Notes: the first letter must be from
0-9 or A-Z, in case that, it stands for canceling the preset
position topic. When testing the preset position, it only display
“NO.XXX”, not display the toptic.
2.5.1.3 CLR LABEL: to clear the preset label.
2.5.1.4 RETURN: to return to the PROGRAM SETUP submenu.
2.5.2 AUTO SCAN: to enter the Auto Scanning submenu:
2.5.2.1 SCAN NO: to set the auto scanning number, maximum is
03.
2.5.2.2 SPEED: to set the scanning speed for each patrol.
2.5.2.3 SET START LIMIT: to set the start position of the scanning.
After the user enter this item, to use the joystick to move
the dome camera and press “CLOSE” to save the current
position.