COP-USA CD55HD User Manual
Page 14
Operation Manual for Intelligent Speed Dome Camera
13
maximum. Following table shows states of coding switches of protocols selected by the
dome camera
Protocol Settings Baud rate
Protocols
DIP-1 DIP-2 DIP-3 DIP-4 DIP-5 DIP-6
B01
ON
OFF
OFF
OFF
OFF
ON
Santachi
OFF ON OFF OFF OFF ON
PELCO-P/D
ON
ON
OFF
OFF
OFF
OFF
PELCO-MK
OFF OFF ON OFF OFF OFF
PANASONIC
ON
OFF
ON
OFF
OFF
ON
Longcomity
OFF ON ON OFF OFF ON
HUNDA600
ON
ON
ON
OFF
OFF
ON
LILIN
OFF OFF OFF ON OFF ON
VICON
ON
OFF
OFF
ON
ON
OFF
MOLYNX
OFF ON OFF ON OFF ON
KALATEL
ON
ON
OFF
ON
ON
OFF
VCL
OFF OFF ON ON OFF ON
SAMSUNG
ON
OFF
ON
ON
OFF
ON
ALEC
OFF ON ON ON OFF ON
Ultrak
ON
ON
ON
ON
OFF
ON
Table 2
Some protocols and the states of the coding switches of normal baud rate of these
protocols are shown as follows:
4. Setup of the Baud Rate of Communication. As shown in Figure 2, SW2 is used to set
the protocol of communication and the baud rate used by the dome camera. DIP-6 and
DIP-5 of SW2 are used to select the baud rate of communication and 4 different baud
rates can be selected in maximum. If the controller adopts non-standard baud rate, you
can adjust it to be identical with that of the controller as per the following table.
Setup of Baud Rate
Baud Rate of Communication
DIP-1
DIP-2
DIP-3
DIP-4
DIP-5 DIP-6
2400bps
OFF
OFF
4800bps
ON
OFF