COP-USA AU40Z - Manual (Page 8)

on the description of the menu of the ball machine.
15. Use J
You can u d joystick to control the Pan/Tilt direction and speed of the dome of the camera
f the joystick you operated (Figure 3). Change
16.
the oystick to Control the Speed Dome Camera：
se the spee
randomly. The speed of pan/tilt is decided by the angle o
the tilting angle of the joystick you can adjust the speed evenly and the camera can be focused
automatically in the course of scan to keep images being distinct.
In case error operation occurs, normal display will be recovered after “Error Operation” appears for 1
second.
VI. Installation and Connection:
of the keyboard and the speed
e
cam
3. Connections betw yboard and the speed dome camera(Figure6)
4. The keyboard co Multiplexer directly(Figure7)
Attention： Please read the operation manual
dome carefully before connecting wires. Any incorrect connections can cause
permanent damage of the device. When connecting wires, first switch off the
power supply of all devices. The communication wires between devices should
be shielded twisted cable. When installing cables they should be far away from
high voltage lines or other possible interference circuits as can as possible.
1. The marking of wires of the transfer box(Figure 4)
g mu e d dom 2. Connections of the keyboard controller controllin ltipl spee
eras(figure5)
RED
BLACK
GREEN
YELLOW
RED：RS485+
BLACK：RS485-
GREEN：GND
YELLOW：RS232 OUT
Figure 4
ALM
ALM
DC IN
GND
R+
R-
VIDEO-
VIDEO+
1
2
3
4
5
6
7
8
ALM
ALM
DC IN
GND
R+
R-
VIDEO-
VIDEO+
1
2
3
4
5
6
7
8
DOME SPEED 1
DOME SPEED N
Figure5
Figure6
een the ke
ntrols the