ChemoMetec NC-100 - Manual (Page 35)

5 Operation of the NucleoCounter
19
5.4.5 LCD contrast (F220)
When typing “F + 2 + 2 + 0 + F + 2 + 2 + 0 + F + 2 + 2 + 0 + F + 2 + 2 + 0 + ↵ ↵ ↵ ↵ ” it is possible to adjust the contrast of the LCD display.
Use the “1 11 1” or “2 22 2” keys in order to increase or decrease the contrast of the LCD-display.
The default value is 4. Values in the range from 0-9 can be chosen. The display will be
updated with the current value, which is shown in the upper right hand corner of the
display.
Contrast? 4 Contrast? 4 Contrast? 4 Contrast? 4
1: Up 1: Up 1: Up 1: Up
2: Down 2: Down 2: Down 2: Down
↵ ↵ ↵ ↵ store store store store
Figure Figure Figure Figure 15 15 15 15. . . . A new LCD-contrast value can now be chosen
Contrast? 6 Contrast? 6 Contrast? 6 Contrast? 6
1: Up 1: Up 1: Up 1: Up
2: Down 2: Down 2: Down 2: Down
↵ ↵ ↵ ↵ store store store store
Figure Figure Figure Figure 16 16 16 16.... LCD-contrast value 6 is going to be chosen
Press “↵ ↵ ↵ ↵ ” to store the chosen value (or “Esc” Esc” Esc” Esc” to return to the previous value).
If the value has been changed the new contrast will be remembered during the session.
When shutting down the NucleoCounter asks if the new value shall be saved as the new
default value. Press “↵
↵ ↵ ↵ ” to save or “Esc Esc Esc Esc” if the present default value should not be
overwritten.
5.4.6 Instrument Info (F100)
When typing “F + 1 + 0 + 0 + F + 1 + 0 + 0 + F + 1 + 0 + 0 + F + 1 + 0 + 0 + ↵ ↵ ↵ ↵ ” the Instrument Info will appear in the display as in the
Display Text Type shown below.
ChemoMetec A/S ChemoMetec A/S ChemoMetec A/S ChemoMetec A/S
NucleoCounter NucleoCounter NucleoCounter NucleoCounter
V4.xx 2005 V4.xx 2005 V4.xx 2005 V4.xx 2005- - - -MM MM MM MM- - - -DD DD DD DD
S/N: 002 S/N: 002 S/N: 002 S/N: 002- - - -01 01 01 01
Figure Figure Figure Figure 17 17 17 17.... Instrument Info
The display shows the name of the instrument in line 2 of the display. The version
number and date (year-month-date) of the integral software of the instrument is shown