Checkline BM - Manual (Page 5)

 Electromatic Equipment Co., Inc
-8-
6.0 MENU LEVEL OVERVIEW
Next calibration curve
Previouse calibration curve
Power off (3 sec.)
Watch the saved data (logs)
Save new value (log)
Power off (3 sec.)
Type selection menu
Store menu
Main menu
Switch upper
Switch lower
Open this menu / Enter
Keypad symbols
Measuring window:
Rolling Menu
Power ON / OFF
Switch upper
Switch lower
Save
Hold
Watch the
saved data
Suppliers data
can be added
Menu:
Enter
Switch upper
Switch lower
Exit
Enter numbers
Enter letters
Next or right
Left
Yes
No
Shift
OK
Edit Logs
Manual Logs
Clear Logs
Options
Status
Options
Date / Time
Log Time
Language
Unlock
°C / °F
Password
Reset
Overview main menu
 Electromatic Equipment Co., Inc
-5-
3.0 CALIBRATION CURVES
Name of calibration
curve
Material under test
Filling
quantity
Measuring
range
2.0k Woodchips Standard woodchips 2.00 kg 5 - 30 %
2.4k Woodchips Standard woodchips 2.40 kg 10 - 35 %
2.8k Woodchips Standard woodchips 2.80 kg 10 - 40 %
3,5k Woodchips Standard woodchips 3.50 kg 20 - 50 %
4.5k Woodchips Standard woodchips 4.50 kg 35 - 60 %
2.8k Coarse WC Coarse woodchips 2.80 kg 10 - 50 %
3.5k Coarse WC Coarse woodchips 3.50 kg 20 - 50 %
2.8k Industr. WC Industrial woodchips 2.80 kg 10 - 50 %
3.5k Industr. WC Industrial woodchips 3.50 kg 20 - 50 %
2.4k P100 chips Very coarse woodchips 2.40 kg 10 - 30 %
2.8k P100 chips Very coarse woodchips 2.80 kg 25 - 45 %
3.5k P100 chips Very coarse woodchips 3.50 kg 35 - 55 %
2.4k Barks Barks 2.40 kg 10 - 35 %
2.8k Barks Barks 2.80 kg 25 - 60 %
5.0k Pellets Pellets made of wood 5.00 kg 5 - 15 %
1.0k Shavings Shavings 1.00 kg 5 - 20 %
1.3k Sawdust Sawdust 1.30 kg 10 - 30 %
2.0k Sawdust Sawdust 2.00 kg 15 - 60 %
1.0k Miscanthus Miscanthus chopped 1.00 kg 10 - 25 %
1.5k Corn cob Corn cob (without corn) 1.50 kg 5 - 45 %
reference To test the BM1. Not for use of measuring the moisture!
Selection of the right calibration curve:
Below you can find advices for selecting the right calibration curve. If you are not
sure about the right calibration curve, we recommend to carry out a comparison
measurement by kiln drying (CEN/TS14774) once.
• Woodchips: standard chips of wood (forest wood chips) according to EU-norm
CEN/TS 14961 class P16 and P45.
• Coarse WC: for coarse chips of wood P45 but with fewer fines. If the weight of
the filled 13 litre bucket is beyond 2,6 kg, the standard wood chips calibration
curves (2,4k resp. 2,0k) have to be used!
• Industr. WC: for industrial chips of wood without barks and fines (similar P63)
and fresh wood chips P16 & P45 (which are not older than two weeks after
cutting down the tree).
If the weight of the filled 13 litre bucket is beyond 2,6 kg,
the standard wood chips calibration curves (2,4k resp. 2,0k) have to be used!