Checkline DS-2000LED-OT - Manual (Page 2)

– 2 –
1.0 INTRODUCTION
Congratulations on your purchase of a DS-2000LED or DS-2000LED-OT
portable stroboscope. The strobe is used to make objects which are
moving at high speeds to appear to move in slow motion or become
motionless. When this occurs, you can safely and easily analyze their
motion, check for proper registration, determine sources of unwanted
vibration, etc.
Typical applications include:
■ High speed assembly lines, conveyor systems, bottling operations, etc.
■ Printing presses and cloth looms
■ Motors, fans, pumps and turbines
■ Calibration and inspection equipment
■ Monitoring laboratory & research applications
Models Available
■ DS-2000LED: operates from Internal Rechargeable Battery or
AC-Power.
■ DS-2000LED-OT: same as above but includes external trigger output.
2.0 C ONTENTS
■ Stroboscope
■ Operating manual
■ Calibration certificate
■ Batteries
■ Case
■ OT Model Only: Cable with plug for trigger signal
2.1 Optional Accessories
■ Tripod adapter
■ Tripod
■ Calibration certificate
■ Belt pouch
– 19 –
13.0 F ACTORY D EFAULT PARAMETERS
The standard parameters on the LED Strobe are:
■ TRIGGER INT (Internal)
■ FPM 1000
■ Hz 16.6
■ PULSE µm 333
■ PULSE deg 2.0°
■ DELAY ms 0.0
■ PHASE deg. 0°
■ DIVIDER 1
■ OPTION 0