BUCHI Melting Point M-565 - Manual (Page 27)

6 Operation
27 MeltingPoint Monitor 1.1 Operation Manual, Version B
6.6.2 System Information report
A system information report contains all settings and service information of a Melting Point M-565. If
requested, use this report to provide detailed information to the customer service.
Link the Melting Point M-565 to the computer and select Tools > Get SysInfo, to generate a PDF.
Settings Service
Language english Serial number 12.12.12.1
Stop after detection enabled Firmware version 1.0.0
Param adjust. during Measurement disabled CPLD version 0.0
Result printout automaically disabled Operating hours 320
Result graph indication enabled No. of melting point measurements 55
Calibration interval 12 Months No. of boiling point measurements 15
Sample ID Request enabled No. of calibrations 0
Barometric pressure request never Last calibration 1/28/2009
Boiling sample conditioning 30 s Last verification 10/30/2008
Melting result thermodynamic Factory adjustment at 20°C 0.00 °C
Thermodynamic factor 1.5 Calibration value at 52 °C 0.00 °C
Company name MARCEL Calibration value at 148 °C 0.00 °C
Date (DD.MM.YYYY) 2/2/2009 Calibration value at 237 °C 0.00 °C
Time (24h) 12:06 PM Calibration value at 335 °C 0.00 °C
Date format DD MM YYYY Factory adjustment at 400 °C 0.00 °C
Time format european (24h) Sample illumination brightness 50 %
Temperature unit °C Camera position horizontally 20
Pressure unit mmHg Camera position vertically 20
Buzzer volume 0 Color gain red for melting point 87
External keyboard EN_US Color gain green for melting point 52
Display brightness 100 % Color gain blue for melting point 38
Color gain red for boiling point 20
Color gain green for boiling point 18
Color gain blue for boiling point 77
Date of board test 1/1/0001
Date of end test 1/1/0001
Board temperature 26.0 °C
Heating present OK
Cooling fan present OK
Housing fan present OK
Temperature sensor present OK
Temperature sensor function OK
24V after fuse present OK
24V input present OK
5V present OK
M-565
CompanyName
SysInfo
MeltingPoint Monitor V1.0
Date, signature
Sysinfo.pdf 1 / 1
6.6.3 Test Result report
A ‘Test Result’ report can be generated after performing a hardware test at the Melting Point M-565.
It contains information about the hardware functionality only. If requested, use this report to provide
detailed information to the customer service.
Link the Melting Point M-565 to the computer and select Tools > Get Test Report, to generate a PDF.
Test Result
Keypad OK Camera value without sample L 13
Rotary knob OK Camera value without sample C 11
24 V input present OK Camera value without sample R 11
24 V after fuse present OK Camera value with sample L 49
5 V present OK Camera value with sample C 57
Heating present OK Camera value with sample R 80
Cooling fan present OK
Housing fan present OK
Temperature sensor present OK
Temperature sensor function OK
External keyboard Not tested
Board temp. sensor OK
Heating function OK
Cooling fan OK
Housing fan OK
Sample illumination OK
Camera position OK
Camera brightness Not OK
Internal clock OK
Display Not OK
M-565
CompanyName
Test
MeltingPoint Monitor V1.0
Date, signature
DeviceTest1212009pdf.pdf 1 / 1