AVF Group NXL4502PB: Cornermount - Manual (Page 16)

16
HANG SUPPORT ARM ASSEMBLY 9
ii
iii
iV
T
1
U
2
T
1
U
2
F
WARNING:-
HEAVY PARTS. HOLD THE ARMS HORIZONTAL TO THE FLOOR AT ALL TIMES. TILTING
THE SUPPORT ARM ASSEMBLY WILL RESULT IN THE TELESCOPIC ARMS SLIDING
OPEN. INJURY COULD BE ATTAINED IF THE ARMS HIT OR ARE DROPPED ONTO
ANOTHER PERSON. USE TWO PEOPLE TO ATTACH ARMS TO WALL BRACKET.
WHILE ONE SUPPORTS THE ARMS THE OTHER SHOULD ADD THE FIXINGS
Y
2
ENSURE TELESCOPIC ARMS ARE INSERTED THE CORRECT WAY AROUND TO SUIT YOUR INSTALLATION.
REFER TO YOUR TEMPLATE LAYOUT (SEE SECTION 6).
(TP
1
) REPRESENTS THE EXTERNAL MEMBER, (TP
2
) REPRESENTS THE INTERNAL MEMBER.
IN THE TEMPLATE EXAMPLE SHOWN, THE TEMPLATE ARRANGEMENT IS NOT THE SAME AS THE OUT OF THE BOX
STANDARD LAYOUT, THEREFORE THE TELESCOPIC ARMS IN THIS INSTANCE WILL NEED SWAPPING AROUND AS
SHOWN
B
A
NOTE:- THIS HOLE IS IN
THE TOP OF THE SUPPORT
ARM ASSEMBLY
STANDARD LAYOUT ALTERNATE LAYOUT
EXTERNAL MEMBER
INTERNAL MEMBER
TP
2 TP
1
SLIDE ARMS
TEMPLATE
EXAMPLE
i