AVF Group NXL4502PB: Cornermount - Manual (Page 11)

11
6
HOLE “C”
SHELF OUTLINE
TP
3
CORNER “D”
CORNER “D”
FIG 3
CAUTION
CLASH
FIG 4
USE TEMPLATE (TP
3
) TO SIMULATE THE SCREEN
AND SUPPORT SHELF ORIENTATION
ENSURE HOLE MARKED “C” (SEE FIG 3) IS
INSIDE SLOT MARKED “B” (SEE FIG 1)
IN ORDER TO ACHIEVE THE
DESIRED LAYOUT IT, MAY BE
NECESSARY TO INVERT THE
TEMPLATES (TP
1
) AND (TP
2
).
THIS IS NORMALLY REQUIRED
IF ANGLE “X” IS GREATER
THAN ANGLE ”Y”, AS SHOWN
IN THE EXAMPLE ABOVE
X°
Y°
IN THE INSTANCE WHERE
STUDDED WALLS EXIST, THE
STUD POSITION WILL
INFLUENCE THE BRACKET
POSITION. USE THE TEMPLATES
TO CHECK POSITION AND
DETERMINE THE IDEAL SET OF
STUDS TO USE
RELEVANT TO STUDDED
WALLS ONLY
WHEN DETERMINING THE SCREEN ORIENTATION ENSURE CORNERS “D”
(SEE FIG 3) DO NOT CLASH WITH (TP
1
) OR (TP
2
) (SEE FIG 4)