Adaptive Technologies 4X2-X462-4X-FS - Manual (Page 3)

© 2012 Adaptive Technologies Group, Signal Hill, CA 90755 USA (562) 424-1100 Rev.00-01/12
Figure 3
Figure 4
Figure 5
Step 8:
Adjust the adjustable leveler foot to level
and plum of the stand.
Step 9: Install Video Wall Frame
Lift the assembled Video frame to the front
of the stand. Align and match the holes
and slots of the video frames outer most
vertical channels and the center channel to
the stand vertical columns’ holes. Secure
the frame to the stand permanently using
the provided bolt, washers and nuts as
shown figure 5. Use three bolts, washer
and nuts per vertical channel (Figure 5).
Secure the two vertical channels closes to
the center to the stand’s horizontal brace
(Figure 5).