Accent-bus, Trigger-connector – acidlab Robokop User Manual

Page 25

Text mode
Original mode

Accent-Bus:

If there is no Accent-source connected to the Accent-Bus, then the Accent-Out of
theh Robokop should be connected.

Now it is possible to control acidlab`s drum-modules (e.g. 8BD, 8SD, …) with
the Accent-Bus.

Please do not set the jumper J1 and J2, if there is no modul in the need of the
CV-/Gate-Bus.

Trigger-Connector:

There is an internal trigger-connector, that can be used for internal wiring to e.g.
drum-modules.