acidlab Robokop User Manual
Page 11
11
The instrument buttons (Trig2, Trig3, ... ), write their instrument to the running
pattern at the instant they are pressed. The accent button (Accent/Trig1), can
be used to add an accent to the Trigger-patterns (Trig2, Trig3, ... ).
The LEDs over the instrument buttons indicate which trigger is programmed at
each step. If you program a trigger on a step more than once, it will not affect
the pattern.
Clear Instrument
If an trigger (AC,Trig1,Trig2, ... ) has been programmed incorrectly or on the
wrong step, it can be erased by holding the Clear button while simultaneously
pressing its corresponding button (AC,Trig1,Trig2, ... ). The trigger will be
erased from the step at the instant the button is pressed.
If you hold the Clear button while holding one of the trigger buttons
(AC,Trig1,Trig2, ... ) for a longer period, that instrument will be erased from all
of the steps the sequencer passes through during the time the buttons are
held.
Clear all Triggers
All of the triggers programmed on a step can be erased by pressing the Clear
button and the Inst./Select button simultaneously.