Appendix, Specifications – Steffes 2106 Owner & Installers Manual User Manual
Page 19
Appendix
A
SPeCIFICATIOnS
* Refer to the Unit Identification Label on lower left side panel for data specific to your heater. In standard
configuration, the heater can be connected to 208V or 240V. Rated input at 208V is 75% of rated 240V
input. If full rated input is required in 208V applications, contact the factory.
MODEl
2102
2102
2103
2104
2105
2106
plug-in
Length - inches
30
30
37
44
51
58
Height - inches
24.5
24.5
24.5
24.5
24.5
24.5
Depth -
inches
(w/out wall bracket)
10.5
10.5
10.5
10.5
10.5
10.5
(w/wall bracket)
12
12
12
12
12
12
Number of Bricks
16
16
24
32
40
48
Number of Brick Boxes
4
4
6
8
10
12
Weight of Heater - lbs
105
91
112
126
145
164
Weight of Bricks - lbs
176
176
264
352
440
528
Installed Weight - lbs
281
267
376
478
585
692
*Element Voltage
120
240 (std)
240 (std)
240 (std)
240 (std)
240 (std)
208 & 277 opt 208 & 277 opt 208 & 277 opt 208 & 277 opt 208 & 277 opt
*Inputs Available - kW
1.32
2.4, 3.0, 3.6
3.6, 4.5, 5.4
4.8, 6.0, 7.2
6.0, 7.5, 9.0
7.2, 9.0, 10.8
*Blower/Control Voltage
115
230 (std)
230 (std)
230 (std)
230 (std)
230 (std)
120 or 208 opt 120 or 208 opt 120 or 208 opt 120 or 208 opt 120 or 208 opt
Blower Wattage
Minimum
30
30
30
30
30
30
Maximum
120
120
120
120
120
120
Storage Capacity
kWh
13.5
13.5
20.25
27
33.75
40
BTU
46,062
46,062
69,093
92,124
115,155
136,480
2100 Series
Appendix A.01