Panasonic TOUGHBOOK CF-50 - Manual (Page 12)

First-time Operation
Eject Button
Label on the top surface, and
insert the shutter-side headfirst.
@ Enter your computer name and administrator password and then select [Next]
------------------------------------------------------------------------------
Remember this password! If the password is forgotten, Windows XP cannot be
operated. (G^ Page 13)
___________________________________________________ _______
© Enter the correct date, time and the time zone, then select [Next].
You can also complete these settings at a later time.
© At the [Networking Settings], select [Typical settings], then select [Next].
© At the [Workgroup or Computer Domain], select [No, this computer is not on a net­
work, or is on a network without a domain], then select [Next].
The computer will restart.
(9) Enter your administrator password and select
8
Create Backup Disks for reinstatlation
(?) Prepare 2HD floppy disks and make sure they are not in the write-protected state, and
then set it.
(Win^o^2000l
Select [Start] - [Programs] - [Panasonic] - [Create Backup Disk] and follow the on­
screen instructions.
(Windo^XBi
Select [start] - [All Programs] - [Panasonic] - [Create Backup Disk] and follow the on­
screen instructions.
When [You do not need to make “BACKUP DISK”] is displayed, there is no need to
create a Backup Disk.
(© Place a label identifying the contents on each disk.
• Name of created backup disk
FIRSTAID FD (When the display for creating the UPDATE FD is shown, create the
disk by following the on-screen instructions.)
r
Store the floppy disks in a safe place. They will enable you to return your computer
to close to the condition at the time of purchase should any problems occur.
When creating backup disks, do not run any other application program.
When creating backup disks and the message [Insufficient files to copy] is dis­
played, select [OK] and then contact Panasonic Technical Support.
While the floppy disk drive indicator is on, do not remove the floppy disk, power
off your computer or use the standby or hibernation function (CP “Standby/
Hibernation Functions”).
Be sure to create the backup disk.
If a backup disk is not created, it will be impossible to return the computer to its
original state. In this case, contact Panasonic Technical Support.
This concludes the first-time use operation guidelines. ^
X note >
Before using the CD-R/RW drive or DVD-ROM & CD-R/RW drive for the first time,
remove the protective sheet from the lens area. The protective sheet inside the drive delays
the opening of the drive by about ten seconds. This delay is not a problem.
12