Panasonic PALMLINK KX-TR320B - Manual (Page 3)

ettìng Started Section 1
1-E Adjusting the Antenna
"he antenna rotates 360 degrees.
'ou can adjust the antenna to three
tifferent click positions.
'or best performance, the antenna
;hould be used in the vertical
losition.
1-F Turning the Power ON/OFF
0 Press and hold (POWER).
•The display will appear.
^ To turn the power off, press and hold
[POWER] until the display disappears.
/ r>
$t3!B SSS3j
_________ ;
1-G Programming Summary
isection number for details.
Each time you press [MENU ], the display will change as
follows.
The display shows the current channel and
group code. /W 38
9 VSZf
/S'
nss.
/W ^38
9 fiwa a
oF
✓
hr
_____/
To select the operating channel, see 2-A.
To select the group code, see 2-B.
To select the VOX sensitivity, see 6-A.
To change the call tones, see 3-D.
To turn on/off the vibratory call, see 3-E.
(KX-TR325 only)
To turn on/off the scrambling function, see
5-C. (KX-TR325 only)
To select the auto power off mode, see 5-B.
Press or (5 fo*' desired settings.
When finished, press [TALK] or wait for 10 seconds.
* You can exit the programming mode any time by pressing [TALK]
or waiting for 10 seconds.
El
Before You Talk
Section 2
The unit has 14 operating frequency channels and 38 group codes.
To talk to others, all users in your group must be using the same
channel and group code.
2-A Selecting the Operating Channel
The factory preset is “1”.
o Press i MENU ]■
•“ " and the current channel will flash
on the display.
0 Press or repeatedly until the
desired operating channel (1-14) is
displayed.
s' '5'45
r SS
^ ^
/ /
w 9 9m zm
o When finished, press [TALK ] or wait for
10 seconds.
• The selected channel will not be cleared even when you turn off
the unit.
2-B Selecting the Group Code (CTCSS)
The Continuous Tone Coded Squelch System (CTCSS) allows you
to ignore (not hear) unwanted calls from other persons who are
using the same channel. It provides communication with silent
standby since you will only receive calls from group members using
the same group code. The unit is equipped with 38 group codes.
The factory preset is “0” (OFF),
The CTCSS does not make your conversation private. It only
allows you to not listen to unwanted conversations.
O Press [MENU] twice.
•“ lEEa" and the current group code will
flash on the display.
0 Press or repeatedly until the
desired group code (0-38) is displayed
(see below).
SN
^ f 0
^^
© When finished, press [ talk ] or wait for
10 seconds.
• The selected code will not be cleared even when you turn off the
unit.
• To communicate with others without a group code, select “0”
(OFF) in step 2.
CTCSS code (unit; Hz)
No. Freq. No. Freq. No. Freq. No. Freq.
1 67.0 11 97.4 21 136.5 31 192.8
2 71.9 12 100.0 22 141.3 32 203.5
3 74.4 13 103.5 23 146.2 33 210.7
4 77.0 14 107.2 24 151.4 34 218.1
5 79.7 15 110.9 25 156.7 35 225.7
6 82.5 16 114.8 26 162.2 36 233.6
7 85.4 17 118.8 27 167.9 37 241.8
8 88.5 18 123.0 28 173.8 38 250.3
9 91.5 19 127.3 29 179.9 0 OFF
10 94.8 20 131.8 30 186.2