Panasonic RS-TR272 - Manual (Page 14)

Nia'mfertance Technical specifications
I
4>
QC
Head cam
To jssiiro i^ood sound (.]iuility for recording ,ind pKiyback, be sure
ft) clenn the he
1) Press OI'PN to (,)pen the cassette holder.
2) Switch oft the power of the cassette deck.
3) Clean the heads, pincli roller and the capstan shaft with a cotton
sw'ab (or with a soft, lint-free cloth) slightly moistened with iso­
propyl alcohol.
Do not use any solution other than alcohol for head cleaning.
Maintenance of external surfaces
To clean this unit, use a soft, dry cloth.
If the surfaces are extremely dirty, use a soft doth, dipped into a
soap-and-water solution or a weak detergent solution.
Wring the doth well before wiping the unit.
Wipe once again with a soft, dry cloth.
Never use alcohol, paint thinner, benzine, nor a chemically treated
cloth to clean this unit.
Such chemicals may damage the finish of your unit.
■ CASSETTE DECK SECTION
Deck system
Track system
Recording system
Bias frequency
Erasing system
Heads
DECK 1
DECK 2
Stereo c.w-'ette dt'ck
4 track. 2 channel
AC bias
SO kl1/
AC erase
Motors
DECK 1
DECK 2
Tape speed
Wow and flutter
Playback head (l’ermalloy)X 1
Kecording/l^layback head (Permalloy)X 1
Erasing head (Double-gap ferrite)X 1
Capstan/Reel table drive (DC servo motor)X 1
Capstan/Reel table drive (DC servo motor)XI
4,8 cm/s (Ì-7/8 ips)
0 , 1 ( W R M S )
Fast forward and rewind times
Approx. 120 seconds with C-60 cassette tape
Frequency response (Dolby NR off)
TYPE I (NORMAL)
TYPE n (HIGH POSITION)
TYPE W (METAL)
40 Hz-14 kHz, ±3 dB
20 Hz-17 kHz (DIN)
40 Hz-14 kHz, ±3 dB
20 Hz-17 kHz (DIN)
40 Hz-15 kHz, ±3dB
20 Hz-18 kHz (DIN)
S/N (signal level=max recording level, HIGH POSITION type tape)
NR off 54 dB (A weighted)
Dolby B NR on 64 dB (A weighted)
Dolby C NR on 72 dB (A weighted)
Input sensitivity and impedance
REC (IN) 500 mV/47 ki2
Output voltage and impedance
PLAY (OUT) 500 mV/500 a
■ GENERAL
Power supply
For Australia and N.Z. AC 50 Hz, 230-240 V
For others AC 50 Hz/60 Hz, 110 V/127 V/220 V/230-240 V
Power consumption
For Australia and N.Z. 18 W
For others 21 W
Dimensions (WXHX D) 430X136X286 mm
Weight 3.8 kg
Note:
Specifications are subject to change without notice.
Weight and dimensions are approximate.