Connecting to pc – Panasonic DMC-LC20T EN User Manual
Page 64
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Connecting to PC
[Preparationj
Only if using V\/indows 98 or 98SE, start
the supplied CD from PC and install the
USB driver.
1
Connect the camera to PC via the
supplied USB cable.
2
After inserting the memory card Into
the camera, turn the power switch
to [OPERATE] and set the mode
dial to playback [fjCj].
[Windows]
The drive is shown on the [My
computer] folder.
® If it is the first time connecting the
camera to PC, the required driver is
installed automatically in order to iet
the camera be recognized by the
Windows Plug and Piay, then it Is
shown on the [My computer] folder.
[Macintosh]
The drive is shown on the screen.
® For further information, read the supplied operating instructions for the USB
connection kit.
® When connecting to PC, it is recommended that you use the AC adaptor
(optional, DMW-AC2) as the power source.
64