Electrical connection – Panasonic CQR255SEUC User Manual

Page 29

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Electrical Connection

• This unit can be connected to an optionai CD changer {CX-DP801EUC). For details consult your nearest

Panasonic dealers.

• For connection to a CD changer, refer to the operating instructions of the CD Changer (CX-DP801EUC).

Caution:

• To prevent damage to the unit, be sure to follow the connection diagram below,
• Remove the covering of the leads about 5 mm long from their end before connecting.
• Do not insert the power connector into the unit until the wiring is completed.
• Be sure to insulate any exposed wires from a possible short-circuit from the car chassis. Bundle all cables and

keep cable terminals free from touching any metal parts.

CX-DP801 EUC

Fuse(3A) „

„

•

Battery Cord

To a Constant power supply

Gropund lead
(To a clean,bare metallic
part of your car)

Be sure to connect to a well grounded
metallik part of your car because noises or
troubles may occur.

DIN Extension Cord

BATTERY LEAD

(Connect to car battery]

POWER

(+12V DC.negative
ground only)

GROUND

(Connect to a clean,
bare metallic part of

your car.)

MOTOR ANTENNA
RELAY CONTROL

(moves antenna up

and down)

AMP RELAY CONTROL <

POWER LEAD

(This lead Is for connec

tion to Panasonic power
amplifier)

LEFT SPEAKER RIGHT SPEAKER

(FRONT )

LEFT SPEAKER RIGHT SPEAKER

(REAR)

CQ-R255SEUC