Panasonic CQR255SEUC - Manual (Page 12)

Radio Basics
continued
Preset Station Setting
Up to 24 stations can be preset in the station memory as follows;
FM1 FM2 FM3 AM
6 stations 6 stations 6 stations 6 stations
Manual Station Preset
Q) Press BAND to select a desired band.
(D Use manual or seek tuning to find a station that you want to program
into memory.
(D Press and hold one of the station selector buttons 1 through 6 until
the display blinks. The memory is now set for that button on the band
you have selected.
Repeat the process to set other stations for the FM1 to AM bands.
lu^.l-гпгч
----- -|------------------------
BUTTON NUMBER
Note: You can change the memory setting by repeating the above pro­
cedure.
Tuning in a Preset Station
Press any of the buttons 1 through 6 to tune in the station preset by the
above steps (D to (D.
Auto Preset Memory
Select a band, and press and hold BAND (АРМ) for more than 2 sec­
onds.
• The 6 strongest available stations will be automatically set in memory
on preset buttons 1 through 6 .
• Once set, the preset stations are sequentially scanned for 5 seconds.
• Press the appropriate preset button for the station you want to hear.
To reduce interference during
FM broadcasts (MONO)
Press and hold SEL for more than 1 second for monaural reception in
case a lot of interference is present in an FM stereo signal or to improve
the listening quality of weak FM broadcasts. To turn it off press SEL for
more than 1 second again.
t'uc’.l р п г ч
12
CAUTION: For safety reasons, do not attempt to program white driving.
CQ-R255SEUC