Remote control basics, Continued, Main unit – Panasonic CQR255SEUC User Manual

Page 20: Power, Volume, 0 /\voln/ (volume control button), Mute, Radio, To change radio mode 0 mode (mode button), Manual tuning

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Remote Control Basics

continued

Operating Procedures

I Aim the remote controller toward the sensor of the

main unit.

General

Power

PWR (Power Button)

• Press PWR to switch on the power.
• Press PWR again to switch off the power.

Volume

0 /\VOLN/ (Volume Control Button)

Press or “N/” to increase or decrease vol

ume level.

Mode Selection

0 MODE (Mode Button)

Press MODE to switch the operation mode as

follows.

Radio 4 TAPE 4 CD Changer Control

t________________ *

Mute

O MUTE (MUTE Button)

• Press MUTE. MUTE is activated.
• Press MUTE again to deactivate when listening

at normal volume.

Radio

To Change Radio Mode

0 MODE (Mode Button)

Press MODE to select Radio Mode.

Radio

TAPE

CD Changer Control

t________________ *

Manual Tuning

Press “-«TUNE" or “TUNE^*-" to move to a

lower or higher frequency.

Selecting a Band

0 BAND (BAND Button)

Press BAND to select the band in sequence.

Seek Tuning

0 '♦^TUNE^^ (Seek Tuning Button)

Press and hold “-♦^TUNE" or “TUNE^^” for

more than 0.5 seconds, then release. The radio
automatically stops on the next station.

CQ-R255SEUC