Panasonic Combinatin VCR AG-513E - Manual (Page 24)

Tape Operation
Search System is...
Each time a recording is made, an invisible index mark is placed on the tape.
When timer recordings are made, program index and information is also included.
These index marks can be used to access or scan recordings.
Index Search
Go directly to the desired recording.
1
Press SEARCH in Playback or Stop
mode to display INDEX SEARCH
screen.
INDEX SEARCH
ENTER INDEX NUMBERil
USING 1-9 KEYS
FORWARD SEARCH :FE
REVERSE SEARCH:REW
NEXT:SEARCH
EXIT:STOP
1) Press number
keys to select
the recording
number.
• To calculate
number, see below.
2) Press FF or REW
to start search.
IN№X SEARCH
FORWARD SEARCHiFF
REVERSE SEARCH:HEW
Play begins at search end.
To search forward or back
1 index, press FF or REW
while screen left is
displayed (10 seconds).
To cancel, press PLAY or STOP.
■ To calculate the Index Number
Example 1:
To go to rec. 2 from rec. 4, enter 3 and press REW.
1 f )
1 1 I 2 3 4 1 5 6 7
Example 2:
To go to rec. 6 from rec. 2, enter 4 and press FF.
NOTE; f indicates start points of each recording.
24
1
h
2 3
1
^
L l I
6 7
• Make each entry within 5 minutes, or the
Index Search mode will be canceled.
• If Index Search is started very close to an
index mark, that index mark may not be
counted in the search.