Panasonic Combinatin VCR AG-513E - Manual (Page 22)

Timer Recording
You can set up to 8 programs to be recorded while
you are away.
1
Press PROG
to display SET PROGRAM screen.
TIMER PHOGHAHMMG
SB£CT:i T
SET :►
end :PH0G
1) Press AV to select
TIMER PROGRAMMING.
2) Press ► to display
screen.
• If a program is already in
memory, press AT, and
► to select an unused
program number.
Ready Checklist
■ All connections are made.
■ Your unit is plugged in.
■ The clock is set to the correct time.
■ The tape is long enough.
■ The record tab is in place.
START STOP CH
CATEGORY:N/A
BiiHBHaKQB
SELECT ;A T
SET ■>
END :PROG/ACTION
Example
r 8 — 9 "
■■31—1—2-
Today’S __ 7 SELECTA
/ T
Selection Order DAILY
Date I WEEKLY WEEKLY WEEKLY _J
(SAT) ..... (MON) (SUN)
Repeat step 3 to set:
• start time, stop time
• Channel (or LINE for outside source)
• Category [N/A (not applicable), SPORTS, MOVIE,
COMEDY, MUSIC, DRAMA]
• Speed (SP, LP, SLP)
P DT START STOP CH SPO
CANCEL:ADD/DLT
SELECT
Y
ENTER
END ;PROG/ACTION
22
Press AT to select
and ► or ◄ to set
the recording DATE.
• 1~31 = One time
• DAILY = MON-FRI
• WEEKLY SUN-SAT
= Same time once a week
Press PROG
(or ACTION) to end
the program.
To Enter More Programs,
press AT to select and
► to set a blank program
number, and then repeat
step 3.
Press PROG twice (or ACTION)
to exit this mode.
' If you're using a cable box, make sure that
it is tuned to the desired channel and the
power is left on for timer recording.
• Make sure TUNER:ON is selected for
Channel Timer Recording.
• PROG TIMER Indicator lights up on the unit.
_Timer Recording Using__
unit Buttons
You can set a Timer Recording
using ACTION key on the unit.
(See page 11.)
VOL CH STOP/EJECT REW/®'
GDD
0
B EEI
1 ] Press STOP/EJECT and REW
together without a tape
inserted to display MAIN MENU.
S Press AT + - to select “VCR,"
and then STOP/EJECT and
REW together to display SET
UP VCR screen.
li Press AT to select “TIMER
PROGRAMMING” and + to
display the TIMER PROGRAM
screen.
4 Repeat main steps 3 •“ 5.