Copy your tapes (dubbing), Connections you’ll need to make, J’l-t – Panasonic Combinatin VCR AG-513E User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Copy Your Tapes (Dubbing)
Connections you’ll need to make.
Playing (Source) VCR
AUDIO VIDEO
OUT 0-1
® IN FROM ANT.
IN
O
o
® OUT TO TV
Recording (Editing) unit
VIDEO IN AUDIO IN
J’l-T-
1
Playback (Source)
Recording (Editing) unit
Insert pre
recorded tape.
Insert blank tape
with record tab.
• Dubbing tapes protected
with Copy Guard will have
poor quality results.
Select “LINE” mode.
See “Selecting Input Mode” below.
3
Press PLAY
then
PAUSE
at
starting point to put in Standby
mode.
— (Perform operation of steps 4
A
Press PLAY
to start dubbing.
Press REC,
then
PAUSE/SLOW
immediately to put in Standby mode.
and 5 on both units simultaneously.)
Press PAUSE/SLOW
to start
dubbing.
Press STOP
to stop dubbing.
Press STOP
to stop dubbing.
Selecting Input Mode (TUNERiON only)
Method 1 :
Press INPUT on the unit.
Channel Number *-
LINE
Method 2:
Press CH
AT.
The display will change as follows.
1 '
C
(CABLE)
(TV)
—►125 or 69
D
Method 3:
a) Press ACTION for MAIN MENU.
b) Press AT^ ► to select “TV," then
press ACTION for SET UP TV screen.
c) Press
AT
to select “INPUT SELECT," and
then press ► to select “TUNER" or “LINE.”
d) Press ACTION twice to exit this mode.
Unauthorized exchanging and/or copying of copyrighted recordings may be
copyright infringement.
15