Panasonic Combinatin VCR AG-513E - Manual (Page 18)

TV Timer Features
ON-TIMER with Alarm
This unit can be set to automatically power on in one of 2
modes (TV or Playback). Even if you set the On Timer, it
will not be performed during Play Lock mode. You can also
combine the On-Timer with a one minute alarm that
gradually increases in volume.
1^
1
Press PROG
to display SET PROGRAM screen.
SET PHOGRAM
TIMER PROGRAMMWG
SELKT;* f
SET :►
END :PflOG
1 ) Press AT to select
"ON TIMER.”
2) Press ► to display
ON TIMER screen.
/ONWMER
Ml 6:-AM CH-
SELECT:* т
SET :►
EhD :PR0G
1 ) Press AT to select
desired settings.
2) Press ► to set the
ON-TIMER TIME or
ON-TIMER mode.
You can choose TV or PLAY for the On
Timer mode. (If TUNER:OFF, you can only
select PLAY.)
Make sure a tape is inserted if Playback
mode is selected.
аУнАишл...........
CANCa. lACO/DLT
SE LE CT ;* »
SET H ►
ENO :PR0G
Press AT to select
ALARM “ON” or “OFF.”
When “ON” is selected,
an alarm will gradually increase in volume for one
minute or until canceled by pressing any button
(including VOL + -).
To Make Corrections,
use AT and ◄ ► to move back and correct.
5 Press PROG
to set ON TIMER.
• “ON TIMER SET” is displayed.
• ON TIMER Indicator lights up on the unit.
To Cancel ON-TIMER set,
repeat steps 1 and 2. Then, press ADD/DLT to
clear the time in step 3. Now, press PROG to end.
“ON TIMER END” briefly appears on-screen.
Ready Checklist
The clock is set to correct time.
• If no button on the remote or unit
(including a button used to turn off
the alarm) is pressed within 60
minutes after unit turns itself on,
it will turn itself back off.
18