Timer function, To set stand time, To set delay time – Panasonic THE GENIUS NN-R687 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Timer Function
This feature allows you to program a standing time after cooking is completed and to program the oven as a minute
timer and/or to program delay start.
> Time will count down without oven operating.
To Set Stand Time
Set
Desired
Cooking
Program
e.g. High 10 min.
(See page 10)
To Set Delay Time
Timer
Clock
Press
once.
THRU
Set desired
amount of stand
time.
Start
Press,
Cooking will start. After
cooking, stand time will
count down without oven
operating.
THRU
Set desired
amount of stand
time.
Set Desired
Cooking
Program
e.g. High 10 min.
(See page 10)
Start
Press.
After completed
delayed time, cooking
will start
NOTE:
1. When the first/second stage has finished, a two beep signal is heard. After all the stages have been completed, the oven will beep five times.
2. If oven door is opened during the Stand Time of Kitchen Timer, the time in the Display Window will continue to count down.
3. Delay Start cannot be programmed before any Auto Control Function. This is to prevent the starting temperature of ftie food from rising before
defrosting or cooking begins. A change in the starting temperature could cause inaccurate cooking results.
4. Timer can be set up to 99 minutes and 99 seconds.
-
16
-