Panasonic RX-FT570 - Manual (Page 6)

îüpes (contimied)
Automatic playback relay E
(deck 1 to deck 2)
When deck 1 playback has finished, deck 2 playback starts
automatically.
O play
dlf
II PAUSE <]PUY
Insert the playback tapes
into deck 1 and deck 2.
Set deck 1 REV MODE
Press PLAY of deck 1.
Press PAUSE of deck 2,
then press PLAY.
Auto Reverse System B
Deck 1 is equipped with an auto reverse function that allows
you to perform two-side playback or repeat two-side play­
back. If DIR is pressed during the tape playback, the reverse
side of the cassette tape can be heard.
To listen to side A and side B with auto reverse at
Deck 1
Select “Two-side REV MODE [.» -a ]” of deck 1 before
pressing PLAY of deck 1.
Be sure to start playback from the forward direction (side A).
If playback is started from the reverse direction (side B). only
side B will be played, after which auto stop will operate.
To listen to side A and side B repeatedly at Deck 1
Select “Repeat two-side REV MODE [ Jl 1” of
deck 1 before pressing PLAY of deck 1.
Playback will be repeated until STOP/EJECT is pressed.
Direction memory function:
if STOP/EJECT is pressed during playback, the direction in
which the tape was running will be memorized.
When PLAY is pressed once again, the same side of the
tape will be played back.