Before [reqyesfding hedp, Before requesting help, Ocordless telephone problem remedy – Panasonic KX-TCM420-B User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before [ReqyesfDing HeDp
o
Cordless Telephone
Problem
Remedy
An alarm tone sounds
when you press (TALK).
1 REMOTE SPl,
ISCREEN/PLAYBACK) or
(INTERCOM 1
oYou are too far from the base unit.
Move closer and try again.
oPIace the handset on the base unit and
try again.
opiug in the AC adaptor.
©Extend the base unit antenna fully.
Static, sound cuts in/out,
fades. Interference from
other electrical units.
©Set the handset and the base unit away
from other electrical appliances (p. 3).
©Move closer to the base unit.
©Extend the base unit antenna fully.
©Press [CH] to select a clearer channel.
The handset does not ring.
©The ringer volume is set to OFF. Press
ILOUD/RINGERI liohtlv while the TALK
indicator light is off {p. 21).
The base unit does not
ring.
©The ringer volume is set to OFF. Press
[HOLD/RINGER] liahtiv while the DIGITAL
SP-PHONE indicator light is off {p. 24).
You cannot store a phone
number in memory.
©You cannot store a number while the
unit is in the talk, speakerphone or
intercom mode.
©Do not pause for over 30 seconds while
storing.
While storing a phone
number, the unit starts to
ring.
©To answer the call, press (TALK),
[REMOTE SPl or (DIGITAL SP-PHONE I.
The program will be canceled. Store the
number again.
(LOCATOR/INTERCOM ]
does not function.
©The handset is too far from the base unit
or is engaged in an outside call.
(REDIAL/PAUSE) does not
function properly.
©It will redial the last dialed number if
pressed at the outset of a call {p. 20). If
another number has been dialed first, it
will operate as a pause button (p. 32).
55