Split screen operation, Without a vcr, Procedure – Panasonic PT 56WXF95 User Manual

Page 11: With a vcr and cable box, With a vcr- no cable box, With a vcr -no cable box

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

plit

creen

peration

Split Screen Operation

This television includes a two tuner split screen feature. This allows watching two (2)

live broadcasts at the same time with or without an external video source (VCR).

Note:

The Remote Control must be programmed with supplied codes to operate the VCR

and Cable Box. See Programming the Remote Control In the Remote Control Quick

Reference Guide.

Without a VCR

Procedure

•

Connect incoming cable to antenna (ANT 1) input on back of TV.

•

Press the SPLIT button on the Remote Control to display the

Split Screen.

Note:

The audio is for the Main Picture, only.

•

Choose channels for the Split Screen Picture by pressing the Remote Control

SPLIT CHANNEL up/down buttons.

•

Choose channels for the Main Picture by pressing the Remote Control CH up/
down buttons or by using the numeric keypad.

With a VCR and Cable Box

Procedure

Press the SPLIT LcS> button on the Remote Control to display the Split Screen.

Note:

The audio is for the Main Picture only.

To view scrambled channels through your Cable Box on the Split Screen:

•

Verify the Cable Box and VCR are ON and the VCR tuned to Channel 3 or 4,

depending on the VCR.

•

Press the TV/VIDEO button on the Remote Control to select the video input for
your VCR.

•

Press CBL button on the Remote Control to select cable box.

•

Choose channels for the Split Screen by pressing the SPLIT CHANNEL up/down
buttons on the Remote Control or by using the numeric keypad.

•

Choose channels for the Main Picture by pressing the TV button on the Remote

Control and using the numeric keypad or CH up/down buttons.

With a VCR- No Cable Box

Procedure

Press the SPLIT button on the Remote Control to display the Split Screen.

Note:

The audio is for the Main Picture, only.

To view an external video source in the Split Screen:

•

Press the TV/VIDEO button on the Remote Control to select the video input for
your VCR.

•

Verify the VCR is on.

•

Insert a tape into the VCR and push Play button to watch the video in the Split

Screen.

•

Choose channels for the Main Picture by pressing the TV button on the Remote

Control and using the numeric keypad or CH up/down button.

Note:

The SWAP button switches the Split Screen and Main Picture source. Press
the RECALL button for Split Screen status, onscreen.