Panasonic WV-BM1400 - Manual (Page 3)

PREFACE PRECAUTIONS
The Panasonic WV-BM1400 Video Monitor is a desk-top
closed circuit Video Monitor especially designed for sur­
veillance and studio applications. It can also rack mounted
with optional rack angle brackets.
This monitor features a 12-11/16" actual diagonal viewing
size screen and produces sharp, black-and-white pictures
with horizontal resolution of 1000 lines at center. The pic­
ture tube has rimband implosion protection.
Front-mounted controls permits fast picture adjustment.
Standard BNC-type input and output connectors are pro­
vided. The WV-BM1400 can be used with other CCTV
monitors or Panasonic Video Tape Recorders.
FEATURES
• 12-11/16" actual diagonal viewing size
• Horizontal resolution is 1000 lines at center of screen
• DC restoration ON/OFF (switchable)
• Under or normal scan size (switchable)
• Short H. AFC time constant for VTR playback
• Loop-through BNC Connectors for video and sync
input and output
• Internal or external sync (switchable)
• Rackmountable with optional rack angle bracket
(a)
(b)
(c)
Do not block the ventilation slots.
Do place the video monitor at least 2 inches(5cm)
away from the wall.
Do not expose the monitor to water or moisture.
Do not operate the monitor if it becomes wet.
Do take immediate action if the monitor becomes wet.
Turn the power off and refer servicing to qualified ser­
vice personnel. Moisture can damage the monitor
and can also create the danger of electric shock.
Do not drop metallic parts through the ventilation
slots. This action could permanently damage the
monitor. If metallic parts should fall through the venti­
lation slots, immediately turn the power off and refer
servicing to qualified service personnel.
Do not attempt to disassemble this monitor. To pre­
vent electric shock, do not remove screws or cover.
There are no user serviceable parts inside. Refer ser­
vicing to qualified service personnel.
Do not use the monitor beyond its temperature,
humidity or power source ratings.
Ambient temperature must not range beyond 14°F-
122°F(-10°C-- h 50°C).
Avoid using the monitor when the humidity is above
90%
The input power-must be 100.- 240V AC 50/60Hz.
When mounting this unit in an EIA standard 19" rack,
be careful to insure that the interior temperature of the
rack does not exceed 122°F (-
h 50°C)
CAUTION :
The supplied power cord is designed for use in 100
- 120V AC.
When operating this unit with other than 120V AC,
replace this power cord with one approved by local
safety regulations.
-
1
-