Speaker setting, Speaker presence and size (®), Press ►] to select the item and press [enter – Panasonic DVD-RV21 User Manual
Page 25: Press [a,t] to select the setting and press [enter, Delay time (®), Changing the delay time, Press [enter, When you are finished
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Changing initial settings
DVD-RV41
DVD
Speaker setting
Select either “2-channel" or “Multi-channel" to suit the speakers you
have connected. You can change the tollowing settings when you
select “Multl-channer.
Speaker presence and size (®)
1. Press
►] to select the item and press [ENTER],
2. Press
[ A , T ] to select the setting and press [ENTER],
Icon examples; Surround speaker (L)
Delay time
(®)
I
DVD
I (Dolby Digital, center
and
surround speakers only)
For optimum listening with 5. t-channel sound, all the speakers, ex
cept for the subwoofer, should be the same distance from the seating
position. If you have to place the center or surround speakers closer
to the seating position, adjust the delay time to make up for the differ
ence.
If distance ® (from the center speaker) and © (from the surround
speakers) are the same as or greater than ® (from the front speak
ers), leave the delay time as “0", the factory preset.
If either distance ® or ® is less than ®, find the difference in the
relevant table and change to the recommended setting.
»Center speaker
Difference
Setting
Approx. 50 cm (1
'/2
feet)
1.3 ms
Approx. 100 cm (3 feet)
2.6 ms
Approx. 150 cm (5 feet)
3.9 ms
Approx. 200 cm (6 feet)
5.3 ms
Difference
Setting
Approx. 200 cm (6 feet)
5.3 ms
Approx. 400 cm (12 feet)
10.6 ms
Approx. 600 cm (18 feet)
15.9 ms
Changing the delay time
1. Press [A,▼,'4,
to select the delay time box and press
[ENTER],
2. Press [ A , V ] to adjust the delay time and press [ENTER].
Channel balance (©)
1. Press
[ A , ▼, ^, ►] to select "Test” and press [ENTER],
A test signal is output from one speaker at a time, starting with the
front left speaker and proceeding clockwise.
FRONT(L)------ »CENTER------*FRONT(R)
I
SURROUND(L)i
-SURROUND(R)
2. While listening to the test signal, press
[ A , T ] to adjust the
volume of the center and surround speakers so they are the
same apparent volume as the front speakers.
(The front speakers cannot be adjusted here.)
3. Press [ENTER],
(The test signals are stopped,)
No signal is output for the subwoofer. To adjust its volume, play
something, then return to this screen to adjust to suit your taste.
When you are finished
Press
[ A , T ,
-4,
►] to select “Exit" and press [ENTER],
■
V)
c
o
?
0>
&
■O
q>
u
c
s
■O
RQTS733