Panasonic G-CODE NV-FJ620 - Manual (Page 21)

Checking a Timer Programme
- The VCR must be turned on, or in timer recording standby
mode.
- Confirm that the TV is on and the VCR viewing channel is
selected.
On Screen Display
1 Press the PROG./CHECK button ®
twice.
- Every time you press the PROG./
CHECK button the programme
shifts below.
2 27WЙ 2ЬНЪ2 21:30 SP
2$ SU-&A 1Q:30 11:00 A
14 SU 15:00 16:00 SP
5 19TU 22:15 23:30 EP
A 2 2STH 20:02 21:30 SP
4 30SA 11:10 10:55 EP
Press the Cursor buttons (►) © to
display the Category. (When [JET
NAVIGATOR] is set to [ON].) Press
the Cursor buttons {►) © again to
make the previous display appear
rs 2 27WE 30:02 21:30 V
^ 2S 5U-3A 10:30 11:00
14 SU 15:00 16t00 □
5 19TU 22:13 23:30 *TC
A2 23TH 20:02 21:30
4 30SA 10:10 19:55 S'
Press the MENU button © to exit
the On Screen Display.
Cancelling a Timer Programme
- The VCR must be turned on, or in timer recording standby
mode.
- Confirm that the TV is on and the VCR viewing channel is
selected.
Press the PROG./CHECK button ®
twice.
Press the PROG./CHECK button 0
repeatedly until the desired timer
programme is highlighted.
3 Press the CANCEL button
4 Press the MENU button © to exit
the On Screen Display.
2 27
25 SU-SA iO
14
5U 15
S 19TU 22
A 2 26TH 20
4 308A 19
2 21:30
0 11:00 A
0 16:00 SP
S
23.30 EP
2 21:30 SP
19:56 £P
Note:
- If timer recording is not completed (due to insufficient tape
or cancellation by the user), the programmed timer
recording data will be cancelled from the memory by
4 A.M two days later.
However, if the timer recording function is activated at that
time, the programmed timer recording data will not be
cancelled.
21