Preparations, Example, Operations – Panasonic G-CODE NV-FJ620 User Manual

Page 10: At the set time (h:m) point, Setting the clock of your vcr, Time reset function

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Setting the Clock of Your VCR

The clock will operate for at least 3 years in total after it has

been set, - in the event of a power failure, it will operate on its
backup system. After 3 years, it will only operate for 1 hour
on its backup system.

Preparations

- Confirm that the TV is on and the VCR viewing channel is

selected.

- Turn on the VCR.

Example;
Date; 16 October, 2005

Time; 20:15

Operations

Press the MENU button ® to
display the Main menu on the TV
screen.

Press the Cursor buttons (A V) ©

to select [CLOCK SET] then press
the OK button 0.

Set each item by pressing the
Cursor buttons (AV^) ©. Press
the Cursor button (◄) © to return to
the previous item.

At the set time (H:M) point:

- When it is kept pressed, the

Indication changes in 30 minute
steps.

- There is no need to press the

Cursor button (►■)

On Screen Display

» CLOCK SET

TUNER PRESET
GH AOD&OELBTE

OPCODE CN SET
SYSTEM
OP'nON

кCLOCKSET

TUNER PRESET

CHAOO&DELETE
Q-COOE CH SET
SYSTEM
ОРЛОМ

Time Reset Function

If the clock is less than two minutes slow or fast, it can easily

be reset to the proper time.

Example:
Resetting the clock to 12:00.00

the TV screen.

then press the OK button

3 When the current clock display on the VCR is between

11:58,00 and 12:01.59, press the MENU button ® as
soon as you hear the 12:00.00 signal. This resets the

time to 12:00.00.

Press the MENU button

The clock starts.