Panasonic PT 51G44 - Manual (Page 8)

P icture I n P icture (PiP) O peration
Picture In Picture (PIP) Operation
PIP Operation with a VCR and Cable Box
This television includes a Picture In Picture (PIP) feature. A second video source (VCR,
camcorder, etc.) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown.
TERMtNALS ON BACK OF PTV
(may vary)
CABLE BOX
•^OUTPU?
TO AUDIO
AMP -c
Incoming
Cable
CABLES NOT SUPPLIED
Note: The remote control must be programmed with supplied codes to operate the VCR and
Cable Box. See Programming the Remote Control in the flemofe Control Quick
Reference Guide.
Procedure
Press the PIP button on the remote control to display the PIP frame.
Note: Initially, the PIP picture is the same as the Main Picture.
To view a different picture in the PIP frame:
• Press the TV/VIDEO button on the remote control to select the video PIP source.
• Verify the CABLE BOX and VCR are ON and the VCR tuned to channel 3.
• Choose channels for the PIP frame by pressing the CBL button on the remote
control and using the numeric keypad or CH up/down buttons.
• Choose channels for the Main Picture by pressing the TV button on the remote
control and using the numeric keypad or CH up/down buttons.
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for
onscreen PIP and Main Picture source status.
©