Panasonic KXT1418 - Manual (Page 9)

Memory Playback
When you have already heard the messages
from a remote phone, you can skip them and
listen only to the newly recorded messages.
1 Dial the telephone number to which the
answering machine is connected.
2 While the Outgoing Message is playing,
place the Controller’s speaker against the
telephone mouthpiece and push the
Memory Playback Button.
•One beep will sound then another beeps
will sound to tell you the number of newly
recorded messages, up to 8 times.
•The unit will play back the new messages.
Remote Reset
To record the future incoming messages
from the first message that you heard by the
Memory playback;
1 Push the Memory Playback/Reset
Button again.
2 Hang up.
To record the future incoming messages
from the beginning of the tape after you
used Memory playback;
Push the Playback Button.
•The unit will rewind to the beginning of the
tape and then playback the incoming
messages.
Push the Playback Button again while
playing back.
• Future messages will be recorded from the
beginning of the tape.
> Hang up.
Recording a Marker
Message
After hearing all messages, you can leave your
index message on the tape.
3-beep 2-beep
^ ----------H marker message
10-second Record date, time, etc.
____________________________________'
3 beeps will be heard after all the recorded
messages have been played back.
1
Start to talk right after the last 2 beeps.
2
When finished, hang up.
------------------------ NOTE--------------------------s
If there is no response from the answering
machine to your remote controller’s
command, the telephone might be equipped
with a carbon microphone.
For the improvement of the performance,
please shake the handset to loosen carbon
particles.
- 8 -