To operate cleaner, Power cord, On/off switch – Panasonic QUICKDRAW MC-V5340 User Manual

Page 9: Handle adjustments, Caution

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TO OPERATE CLEANER

CAUTION

Do not use outlets above counters Damage to items in the surrounding areas
could occur. Be sure the switch is in the off position vi/hile plugging the cord in

POWER CORD

NOTE To reduce the nsk of electrical shock, this vacuum has a pdanzed plug, (one blade is wider

than frie other) This plug will fit in a polanzed outiet only one way If the plug does not fit fully in the
outlet, reverse the plug If it still does not fit, contact a qualified electncian to install the proper outlet

DO NOT CHANGE THE PLUG IN ANY WAY

ON/OFF SWITCH

1 Plug the power cord into a 120V outlet

2 To start the vacuum cleaner, push the

switch on the top of the dust compartment
to the ON position

3 To stop the vacuum cleaner, push the

switch on the top of the dust compartment
to the OFF position

HANDLE ADJUSTMENTS

The handle may be lowered
to any position required Just

step on the area as indicated
by the Illustration and
lower the handle as

desired

1 Upright position

The handle locks in this

position for storage
The handle should
always be in an
upright position when
the cleaning tools
are used

2 Middle position

This position IS for

normal cleaning

3 Low position

This position

IS used for
cleaning
under

furniture